Design and implementation of an automatic control system for lighting: Regulation of artificial illuminance based on natural lighting
DOI:
https://doi.org/10.54753/cedamaz.v13i2.2110Keywords:
Analog Control, Lighting, LED, Energy efficiencyAbstract
This work proposes an analog control system to control dimmable LED luminaires depending on the signal. coming from a lighting sensor, with the aim of using only the energy necessary to maintain a lighting level of 300 lx in the work plane of a 27.54 m2 university study classroom. That is, artificial lighting adapts to the level of natural lighting, which represents a reduction in electrical consumption and in turn economic savings in electricity service. Smart electricity consumption meters were used to collect data from the old system with fluorescent technology that was used in the classroom, to then compare with the consumption data of the new automatic lighting control system (ALCS), which regulates the electrical power used and at the same time the luminous flux of the LED lamps, depending on the natural lighting.Metrics
Metrics Loading ...
Published
2023-12-31
How to Cite
Pacheco-Macas , J., Chávez-Romero , R., Chávez-Romero , S., Chuncho-Morocho , J., Coronel-Villavicencio, I., Gomez-Peña , J., … Samaniego-Ojeda , C. (2023). Design and implementation of an automatic control system for lighting: Regulation of artificial illuminance based on natural lighting. CEDAMAZ, 13(2), 205–217. https://doi.org/10.54753/cedamaz.v13i2.2110
Issue
Section
Ciencias exactas e ingenierías
License
Copyright (c) 2024 CEDAMAZ
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Those authors who have publications with this journal, accept the following terms:
- After the scientific article is accepted for publication, the author agrees to transfer the rights of the first publication to the CEDAMAZ Journal, but the authors retain the copyright. The total or partial reproduction of the published texts is allowed as long as it is not for profit. When the total or partial reproduction of scientific articles accepted and published in the CEDAMAZ Journal is carried out, the complete source and the electronic address of the publication must be cited.
- Scientific articles accepted and published in the CEDAMAZ journal may be deposited by the authors in their entirety in any repository without commercial purposes.
- Authors should not distribute accepted scientific articles that have not yet been officially published by CEDAMAZ. Failure to comply with this rule will result in the rejection of the scientific article.
- The publication of your work will be simultaneously subject to the Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)
